Ecolab EcoAdd Series - Service Interval] - [Variable]

7.10.11.1 [Service interval]
- [Variable]
2
3
4
5
6
7
Fig. 64: Service interval - variable
After selecting [Service interval] - [V
ariable] the setting is saved by clicking the
button. The screen switches to the configuration overview.
[Select Service interval] - setting:
1.
[Call up the Main menu] :
Ä Chapter 7.7 ‘Main menu’ on page 73
2.
[Select Configuration] :
Ä Chapter 7.10 ‘Overview - Configuration’ on page 92
3. Using the scrollbar on the right side of the screen, scroll to the
[setting Service interval] and select.
4. ‘Select V
ariable’ .
ð
The selection field ‘Variable’ is marked.
5.
[ Click Next] to save the setting.
ð
Screen change for the setting: ‘Service interval
’ / ‘Weeks’.
6. Enter the number of weeks with the scrollbar
.
7.
Press the button.
ð
All settings are saved, and the screen switches back to the configuration
overview
.
8.
By pressing the button, you can return to the [main menu].
9.
By pressing the button, you can return to the [operating display].
Control / Software
113 417102276 Rev. 5-02.2020