7.10.1 Pump name
Under menu item “Pump name” an individual name can be entered, which is then shown
in the display
.
Fig. 45: Configuration: Pump name
Factory setting: No name allocated.
[Pump name] - setting:
1.
[Call up the Main menu] :
Ä
Chapter 7.7 ‘Main menu’ on page 73
2.
[Select Configuration] :
Ä
Chapter 7.10 ‘Overview - Configuration’ on page 92
3. [Select Pump name]
.
ð
The display switches to the screen for viewing or editing the pump name.
4.
Change the name of the pump with the scrollbar
Ä
Chapter 7.3.3 ‘Scrollbars, radio
buttons, selection fields, number and text input’ on page 67 as described below.
An existing name that is to be changed or incorrectly entered
characters can be removed with the delete button .
5.
Press the button to save the [Pump name].
ð
The screen switches to the overview: [Configuration].
6.
By pressing the button, you can return to the [main menu].
7.
By pressing the button, you can return to the [operating display].
Control / Software
93 417102276 Rev. 5-02.2020
To Next Page
Loading...
Need help?
General
