14.3.2 Pump key group II - “Pump head” [01110S|D|F|C|0|0|S]
Pos. 4: ‘Capacity in L/back-pressure/driver unit’
01110S
Key: Capacity in L: [l/h] Pressure [MPa (bar)] Size of driver unit
00510X 0,05 - 5 1 (10) XS
01110S 0,11 - 11 1 (10) S
03003S 0,3 - 30 0,3 (3) S
05010M 0,50 - 50 1 (10) M
12003M 1,2 - 120 0,3 (3) M
Pos. 5: ‘Material: Pump head/valves’
D
Key: Description:
P PP (polypropylene)
D PVDF (polyvinylidene difluoride)
S Stainless steel (V4A)
Pos. 6: ‘Material: Gaskets
’
F
Key: Description:
F FKM (fluorocarbon rubber)
e EPDM (ethylene propylene diene monomer rubber)
T PTFE coated (polytetrafluoroethylene)
K FFPM (Kalrez) (perfluorinated rubber)
Pos. 7: ‘Material: V
alve balls’
C
Key: Description:
C Ceramic
T PTFE (polytetrafluoroethylene)
S Stainless steel V4A
Pos. 8: ‘V
alve spring’
0
Key: Description:
0 No spring
1 SAV: 0.1 bar, DRV: 0.1 bar
2 SAV: no spring, DRV: 0.3 bar
3 SAV: no spring, DRV: 0.5 bar
Pos. 9: ‘Hydraulic connection’
0
Key: Description:
0 Without hose connection parts
Pos. 10: ‘
Pump head version’
S
Key: Description:
S Standard version
14.3.3 Pump key group III
"Housing/driver unit" [1|S]
Pos. 11: ‘V
oltage’
1 100-240 V, 50/60 Hz
Pos. 12: ‘Housing/driver unit version
’
S Standard housing
Technical specifications
183 417102276 Rev. 5-02.2020
To Next Page
Loading...
