Ecolab EcoAdd Series User Manual

12.2.3 Pump head 11 l/h
A
1
2
3
4
5
6
7
8
9
5
Fig. 101: Replacement part module: Pump head 11 l/h
Pos. Description Item No. EBS No.
A Adhesive label for commissioning / tightening torque (4 Nm) 34800327 on request
1
Cover plate PP pebble grey 35200180 on request
Cover plate PVDF natural 35200181 on request
2 Hexagon socket screw, M 5 x 50, DIN 912, V2A, 413031127 on request
3 Washer, 5.3 x 15 1.6, DIN 9021, V2A 413501720 on request
4
Pump head, 11 l/h, PP 35200112 on request
Pump head, 11 l/h, PVDF 35200113 on request
5
Suction/pressure valve, PFC-000 G3/8-G3/8-99 252010 on request
Suction/pressure valve, PEC-000 G3/8-G3/8-99 252011 on request
Suction/pressure valve, DFC-000 G3/8-G3/8-99 252012 on request
Suction/pressure valve, DEC-000 G3/8-G3/8-99 252013 on request
6
Vent screw PP/EPDM 252034 on request
Vent screw PP/FKM 252035 on request
Vent screw PV/EPDM 252036 on request
Vent screw PV/FKM 252037 on request
7 Diaphragms 35200114 on request
8 Intermediate plate 35200115 on request
9 Protective membrane 35200137 on request
NOTICE!
During assembly
, it is essential to observe the tightening torque attached to
the pump head! See also
Ä Chapter 14.6 ‘Tightening torques’ on page 185
Wearing parts and spare parts
172417102276 Rev. 5-02.2020

Ecolab EcoAdd Series Specifications

General

Brand	Ecolab
Model	EcoAdd Series
Category	Water Pump
Language	English