Other markings
The following markings are used in these instructions to provide emphasis:
1., 2., 3. ...
Step-by-step operating instructions
ð
Results of the operating steps
References to sections of these instructions and related documents
Lists in no set order
[Button] Controls (e.g. button, switch), indicators (e.g. signal lights)
‘Display’ Screen elements (e.g. buttons, assignment of function keys)
1.5 Special markings in this operating manual
DANGER!
This combination of symbol and signal word indicates an imminently
dangerous situation that could lead to the system toppling over.
DANGER!
This combination of symbol and signal word indicates an imminently
dangerous "risk of slipping".
DANGER!
This combination of symbol and signal word indicates an imminently
dangerous situation that may be caused by a hazardous electrical voltage in
the system or system parts.
DANGER!
This combination of symbol and signal word indicates an imminently
dangerous situation that may be caused by accidental release of the system or
system parts.
The term "release" is used to describe the all-pole and all-round isolation of
an electrical system from live parts. An isolated section of different lengths
must be created between the live and the de-energised parts of the system,
depending on the operating voltage.
DANGER!
This combination of symbol and signal word indicates an imminently
dangerous situation which may be caused by corrosive substances in the
metering medium.
DANGER!
This combination of symbol and signal word indicates an imminently
dangerous situation which may be caused by biologically dangerous
substances in the metering medium.
General
10MAN046590 Rev. 6-03.2022
To Next Page
Loading...
