7.7 Refitting the pumps
NOTICE!
In the case of long metering lines or back-pressures > 0.2 MPa (2.0 bar), it
is possible to exchange the factory-installedpumps for EMP III (54 l/h) pumps.
The pumps must be installed in pairs; equipment may not be mixed.
Illustration Description Material Item No. EBS no.
EMP III, 54 l/h
(2 units required)
PP/EPDM 149218 10024864
Pump connection set
15.9/22.3 G5/8i
(4 pcs required)
PP 201550 10026940
Pump bracket
for 2 x EMP III (54 l/h) pumps.
Attachment parts for pumps and
brackets enclosed.
(1 pc required)
PP 201702 10033157
Installation
59 MAN046590 Rev. 6-03.2022
To Next Page
Loading...
