14 Decommissioning / disassembly / environmental protection
Personnel:
n
Operator
n
Mechanic
n
Service personnel
n
Specialist
Protective equipment:
n
Protective work clothing
n
Face protection
n
Protective eyewear
n
Protective gloves
n
Chemical-resistant protective gloves
n
Safety shoes
DANGER!
Risk of injury due to the disregard of the specified personal protective
equipment (PPE)!
For all disassembly work, please respect the use of the PSA which is specified
on the product data sheet.
14.1 Decommissioning
DANGER!
The procedures described here may only be carried out by skilled personnel as
described at the start of the chapter, this may only be done using PPE.
The procedure for shutting down is as follows:
1. Before carrying out any subsequent work, isolate the electrical supply completely
first of all and secure it against being switched on again.
2. Physically disconnect the entire power supply; dissipate stored residual energy.
3. Drain and remove operating fluids and consumables.
4. Remove the remaining processing materials and dispose of them
in an environmentally-friendly way.
Decommissioning / disassembly / environmental
protection
109 MAN046590 Rev. 6-03.2022
To Next Page
Loading...
