You will be provided with up-to-date safety data sheets for the products you are using
when they are first installed.
During the course of ongoing improvement and continued development of Ecolab
products, products may vary in their composition. It is possible that products may even
be replaced with other products.
In either case, the most current version of the safety data sheets will be sent to you. If
you are not sure you have a current version of the safety data sheet, please contact your
Ecolab consultant. He will be glad to assist you in guaranteeing that the measures for
safeguarding health in the workplace are ensured.
The best thing to do is to post the safety data sheets right beside the equipment or next
to the containers so that the proper countermeasures can be implemented at once in the
event of an accident.
Persons who are familiar with operating the equipment must be instructed accordingly and
trained.
2.11
Service life
Depending on properly conducted maintenance (visual inspection, functional testing,
replacement of parts, etc.), the life span is approximately 10 years.
Subsequently, revision and, in some cases, a major overhaul by the manufacturer is
required.
2.12
Safety measures taken by the operator
NOTICE!
It is expressly up to the operator to train, monitor and instruct its operating and
maintenance personnel so that they comply with all of the necessary safety
measures. The frequency of inspections and controls must be complied
with and documented.
WARNING!
Requirements for system components provided by the operator
To avoid personal injury and damage to the system, it must be ensured that
the system components provided to you (pipe connections, flanges) have
been correctly installed. W
e recommend compensators for the transition from
plastic to stainless steel pipes in order to minimise loads during installation and
operation. If the installation is not carried out by Ecolab Engineering GmbH
Customer Support/Service, steps must be taken to ensure that all components
consist of the correct materials and meet the applicable requirements.
Safety
24MAN046590 Rev. 6-03.2022
To Next Page
Loading...
