1.7 Article numbers / EBS-Article numbers
Both item numbers and EBS numbers could be shown in these operating
instructions. EBS numbers are Ecolab-internal item numbers and are used
exclusively “internal within the group”.
1.8 Equipment marking – identification plate
Information on equipment marking or the information on the identification plate
can be found in the chapter on "Technical data".
It is important for all queries to state the correct name and type.
This is the only way of ensuring fast and accurate processing.
1.9
Warranty
The manufacturer provides a warranty for operational safety, reliability and
performance under the following conditions only:
n Assembly, connection, adjustment, maintenance and repairs must be carried out by
qualified and authorised specialists with the aid of the User Manual and all the
provided documents.
n Our products are used in accordance with the instructions in the User Manual.
n Only OE spare parts must be used for repairs.
Our products are built, tested and CE certified in accordance with current
standards/guidelines. They left the factory in a safe, faultless condition.
To keep the equipment in this condition and to ensure risk-free operation,
the user must observe the instructions/warnings, maintenance regulations,
etc. contained in these operating instructions and, if applicable, affixed to the
product.
The warranty and service conditions of the manufacturer also apply.
1.10
Contact
1.10.1 Manufacturer
Ecolab Engineering GmbH
Raiffeisenstraße 7
83313 Siegsdorf, Germany
Telephone (+49) 86 62 / 61 0
Fax (+49) 86 62 / 61 166
engineering-mailbox@ecolab.com
http://www.ecolab-engineering.com
General
13 MAN046590 Rev. 6-03.2022
To Next Page
Loading...
