WARNING!
This is a Class A product. This device can cause interruptions when operating
it in a home environment.
Information about the application of the European EMC directive
2014/30/EC :
As per DIN EN 61000-6-4 (Generic standard for emitted interference, industrial
sector)
the machine/installation must not be installed in a residential area, in business
and commercial areas and in small enterprises, unless
it also complies with the standard DIN EN 61000-6-3 (emitted interference,
residential area).
2.3 General workplace dangers
Risk of slipping
DANGER!
Risks of slipping are to be identified using the adjacent symbol.
Spilled chemicals are a slipping hazard in wet conditions.
WARNING!
Risk of slipping due to fluid in the operation and provisioning area!
– W
ear non-slip, chemically resistant shoes when working.
– Place product containers in a tank to prevent a slipping hazard caused by
leaking fluids.
ENVIRONMENT!
Leaked, spilled metering media must be cleaned and disposed of correctly
,
according to the instructions on the safety data sheet. It is essential to ensure
that the required personal protective equipment (PPE) is used.
Risk due to electrical energy
WARNING!
The protective earth connection is marked by this symbol at the connection
points.
Safety
16MAN046590 Rev. 6-03.2022
To Next Page
Loading...
