DANGER!
Risk of fatal injury from electric current!
Electrical hazards are identified by the symbol opposite. Work on those
places may only be carried out by skilled personnel who are duly trained and
authorised.
Contact with live parts represents immediate danger to life due to electrocution.
Damage to the insulation or individual components can be life-threatening.
– Before starting work, create a de-energised state and ensure this state is
maintained for the duration of the work.
–
If the insulation is damaged, switch off the power supply immediately and
arrange for repairs.
– Never bridge or decommission fuses.
– When replacing fuses, comply with the rating.
– Do not expose live parts to moisture as this may cause short-circuits.
Chemical hazards (metering medium/active substance)
DANGER!
Risk of injury to the skin and eyes caused by the chemical used
(metering medium).
– Read the enclosed safety data sheet carefully before using the metering
medium.
–
The safety regulations and the required protective clothing when working
with chemicals must be complied with.
– Attention must be paid to the information included on the product data
sheet for the metering medium used.
DANGER!
Hands must be washed before breaks and at the end of the working day.
Information about the usual precautions when handling chemicals and about
the use of PPE can be found on the relevant safety data sheet for the chemical
being used and must be complied with.
ENVIRONMENT!
Metering medium that leaks or spills may be harmful to the environment.
Leaks or spills of a metering medium must be cleaned up and disposed of
correctly in accordance with the instructions on the safety data sheet.
It is imperative to use the prescribed PPE.
Preventive action:
Place product containers in a tray to collect leaking fluids without harming the
environment.
Safety
17 MAN046590 Rev. 6-03.2022
To Next Page
Loading...
