Possible symbols on the packaging
Top
The arrowheads mark the top of the package.
They must always point upwards, otherwise the contents could be damaged.
Fragile
Indicates packages with fragile or sensitive content.
Handle the package with care, do not drop or knock.
Keep this
product dry
Protect packages from moisture and keep dry.
Electronic
components
Electronic components contained in the package.
Cold Protect packages from the cold (frost).
Stacking
The package may be stacked with other similar packages until the specified
maximum number is reached. Pay attention to the exact stacking number
.
IPPC symbol
International symbol: Handling status for wooden packaging
n DE: Country code (e.g. Germany)
n NW: Regional identification (e.g. NW for North Rhine W
estphalia)
n 49XXX: Registration number of the wood suppliers
n HAT: Heat treatment
n MB: Methyl bromide (gas-treated)
n DB: Debarked
3.4 Recycling of the materials required for transport
After unpacking of the machine, the package has to be removed.
The package is made of wood and can be burned. The plastic material around the
machine can be recycled. After installation
of the machine transportation locking have
to be removed. The transportation locking is made of steel and can be recycled.
Transportation locking can also be stored for possible reuse.
3.5 Storage
Under certain circumstances, instructions for storage, which go beyond
the requirements listed here, can be found on the package.
These must be complied with accordingly.
n Do not store outdoors.
n Store in a dry and dust-free place.
n Do not expose to aggressive media.
n Protect from sunlight.
n A
void mechanical vibrations.
n Storage temperature: +5 to 40° C.
n Relative humidity: max. 80 %.
n For storage periods of more than 3 months, check the general condition of all parts
and packaging regularly
. If necessary, refresh or renew the preservative.
Delivery, transport and packaging
37 MAN046590 Rev. 6-03.2022
To Next Page
Loading...
