Epson EPL-N4000 - Page 137

EPSON EPL-N4000/EPL-N4000+ Chapter 3 Troubleshooting
Rev.B 123
Table 3-48. Spots
Step Actions and Questions Yes No
4
FUSER INSPECTION
1. Generate another Blank Test Print
and switch OFF printer power when
the print is halfwa
y
throu
g
h the Fuser.
2. Open the Left Upper Cover.
3. Examine the paper areas before the
ima
g
e enters the Fuser and after the
ima
g
e exits the Fuser.
Is paper clean before it enters the
Fuser, but there are spots on the
paper when it exits the Fuser?
Replace the
Fuser
Assembl
y
.
Clean or
replace the
Offset/Exit
Assembl
y
.