Epson EPL-N4000 - Left Upper Cover Assembly; Removal

EPSON EPL-N4000/EPL-N4000+ Chapter 4 Disassembly and Assembly
Rev.B 185
4.2.39 Left Upper Cover Assembly
(See “Left Upper Cover Assembly” on pa
g
e -272)
4.2.39.1 Removal
1. Remove the Rear Cover. (“Rear Cover Assembly” on pa
g
e -140)
2. Open the Duplex Unit.
3. Open the Left Upper Cover.
4. Use a screwdriver blade to open the latch securin
g
the Front Shaft
Hin
g
e, and slide the Hin
g
e out of the Cover Assembly. Do not slide
the Hin
g
e completely out of the printer frame.
5. Use a screwdriver blade to open the latch securin
g
the Rear Shaft
Hin
g
e, and slide the Hin
g
e out of the Cover Assembly. Do not slide
the Hin
g
e completely out of the printer frame.
6. Pull the Left Upper Cover Assembly away from the printer frame.
7. Remove the two screws securin
g
the two Cover Supports to the
frame, and remove the Cover.
Figure 4-54. Removal of Left Upper Cover Assembly
CAUTION
When the Left Upper Cover is open, the BTR is
exposed. Do not touch the BRT. Grease and dirt on,
or physical damage to the BTR will effect print
quality.