EPSON EPL-N4000/EPL-N4000+ CHAPTER 1 Product Description
Rev.B 51
1.4.7 Initialization Process
In this printer, followin
initialization process are performed automati-
cally or manually. The printer
oes to the On-line(ready) condition after
initialization process is completed successfully.
Reset Process
This initialization process performs only the active interface, the
data received by other interface is stored. This initialization is used
when the copies are canceled or the printin
invalid data is halted.
Operation: Press “Continue” switch, pressin
the “Alt” switch.
Processin
:
•
Cancel the print request
•
Cancel the buffered data from the current port before the
initialization.
•
Cancelin
the error
Warm boot processin
This initialization process stops printin
for all interfaces and
perform initialization until ri
ht after the power is turned on, but does
not perform various checks.
Operation
While pressin
“ALT” switch, press “Continue” switch until
“Reset All” is indicated at LCD.
Processin
:
•
Initialization of Memory
•
Clear the received buffer of all interfaces
Cold Start Processin
This initialization is activated by turnin
the power on, and perform
various checkin
ine
•
Initialization of ROM, EEPROM, DRAM
•
Initialization and checkin
of peripheral devices
•
Initialization of memory
To Next Page
Loading...
