Epson EPL-N4000 - Tray 1 Feeder Assembly; Removal

EPSON EPL-N4000/EPL-N4000+ Chapter 4 Disassembly and Assembly
Rev.B 150
4.2.11 Tray 1 Feeder Assembly
(See “Paper Pick Up - Tray 1” on pa
g
e -259)
4.2.11.1 Removal
1. Tray 1 from the printer.
2. Remove the Rear Cover. (“Rear Cover Assembly” on pa
g
e -140)
3. Remove the Front Chute. (“Tray 1&2 Front Chute Assemblies” on
pa
g
e -155)
4. Remove Tray 1 Feed Clutch alon
g
with the Feed Gear and Bearin
g
.
(“Tray 1 Feed Clutch” on pa
g
e -145) (Refer to the fi
g
ure).
5. Remove the E rin
g
that is securin
g
the Feed Gear (located behind
the Feed Clutch) to the shaft, and remove the Feed Gear and
Bearin
g
.
6. Hold down the Stopper Link while you pull the Feeder Assembly to
the front of the printer frame.
7. Remove the Feeder Assembly from Feeder 1.
Figure 4-19. Removal of Tray1 Feed Clutch
CAUTION
Take care not to break or dislodge the No Paper
Actuator when removing or replacing the Tray1 Feeder
Assembly.