Epson EPL-N4000 - Tray2 Take Away Roll Assembly; Removal; Installation

EPSON EPL-N4000/EPL-N4000+ Chapter 4 Disassembly and Assembly
Rev.B 162
4.2.20 Tray2 Take Away Roll Assembly
(See “Retard and Take Away- Tray 2” on pa
g
e -263)
4.2.20.1 Removal
1. Remove Tray 2 Retard Assembly. (“Tray 2 Retard Assembly” on
pa
g
e -163)
2. Remove the E rin
g
s and Gears attached to the rear of the Take
Away Roll shaft.
3. Remove the Center Bearin
g
on the Take Away Roll Shaft, and slide
the Roll out of the Retard Support.
Figure 4-30. Removal of Tray2 Take Away Roll Assembly
4.2.20.2 Installation
1. Reinstall the Take Away Roll shaft onto the Retard Support.
2. Reinstall the Center Bearin
g
onto the Take Away Roll shaft, and
secure the shaft to the Support.
3. Reinstall the Gears and E rin
g
s to the rear of the Take Away Roll
shaft.
4. Reinstall Tray 2 Retard Assembly. (“Tray 2 Retard Assembly” on
pa
g
e -163)