EPSON EPL-N4000/EPL-N4000+ Chapter 4 Disassembly and Assembly
Rev.B 175
4.2.30 MSI Pad
(See “MSI Feeder Assembly (Manual Feeder)” on pa
e -164)
4.2.30.1 Removal
1. Remove the MSI Feed Roll. (“MSI Feed Roll” on pa
e -172)
2. Remove the MSI Nud
e -173)
3. Turn the MSI Feeder upside down.
4. Remove the KL clip securin
the MSI Pad Pin to the Feeder, and
slide the Pin out of the MSI Pad.
5. Turn the MSI Feeder ri
ht side up.
6. Pull back the MSI Paper Guide and slide the MSI Pad to the ri
ht
and out of the Feeder.
4.2.30.2 Installation
1. Pull back the MSI Paper Guide and slide the MSI Pad between the
Guide and the Pad Sprin
.
2. Turn the MSI Feeder upside down.
3. Slide the MSI Pad Pin into the hole in the Feeder, throu
h the holes
in the three le
s of the MSI Pad, and out throu
h the other hole in
the Feeder.
4. Use a KL clip to secure the MSI Pad Pin to the Feeder.
5. Press down on the MSI Pad to make sure it moves smoothly and
has a sprin
-action return.
6. Reinstall the MSI Nud
e -173)
7. Reinstall the MSI Feed Roll. (“MSI Feed Roll” on pa
e -172)
Figure 4-44. Removal of MSI Pad
To Next Page
Loading...
