EPSON EPL-N4000/EPL-N4000+ Chapter 7 Appendix
Rev.B 231
7.1.2 How to use P/J location Table and Map
Use the table and maps in this section to locate specific P/J connectors
within the printer. To find the location of a P/J:
1. Locate the P/J connector number in the first column of the table.
2. Find the pa
e number for the correspondin
map in the second
column.
3. Go to that pa
e and find the connector.
Table 7-2. P/J Location Table
Table 7-1. P/J Location Table
P/J
Location
Map Connected to
Other end
connected to
1pa
e -238
LVPS (110VAC) Main Switch F52/F53
12 pa
e -236 Fuser Heat Rods & STS J23 AC Drive PWB &
J600
13 pa
e
connector
CE11 & CE12 (110VAC
line)
19 pa
e -238 Output - Noise Filter
PWB
F51/F53
20 pa
e -238 AC Drive PWB AC Hot and AC N
23 pa
e -238 AC Drive PWB P/J12 Fuser Heat Rods &
STS
100 pa
istration Sensor P/J459 MCU PWB
101 pa
Roll 1 Sensor P/J403 MCU PWB
102 pa
1 No Paper Sensor P/J459 MCU PWB
P/J
Location
Map Connected to
Other end
connected to
103 pa
1 Level Sensor P/J459 MCU PWB
104 pa
e -236 Fuser Exit Sensor P/J462 MCU PWB
105 pa
1 Paper Size
Sensor
P/J461 MCU PWB
106 pa
e -234 SOS Sensor P/J456 MCU PWB
107 pa
e -235 MSI Size Sensor P/J403 MCU PWB
108 pa
e -235 MSI No Paper Sensor P/J403 MCU PWB
109 pa
e -236 Face Up Exit Sensor P/J462 MCU PWB
127 pa
e -236 MCU PWB Toner Sensor
133 pa
e -236 Full Stack Sensor P/J462 MCU PWB
140 pa
2 No Paper Sensor P/J408 MCU PWB
141 pa
2 Level Sensor P/J408 MCU PWB
142 pa
2 Size Sensor P/J408 MCU PWB
143 pa
Roll Sensor P/J408 MCU PWB
144 pa
2 Left Cover
Interlock Switch
P/J607 and P/J408 MCU
PWB
200 pa
istration Clutch P/J462 MCU PWB
201 pa
Clutch P/J462 MCU PWB
202 pa
e -236 Feed Clutch 1 P/J462 MCU PWB
203 pa
e -236 Lift Up Motor 1 P/J403 MCU PWB
204 pa
e -236 Fuser Fan P/J460 MCU PWB
205 pa
e -236 Main Motor P/J460 MCU PWB