EPSON EPL-N4000/EPL-N4000+ CHAPTER 1 Product Description
Rev.B 23
1.4 OPERATION
1.4.1 Control Panel
The control panel of this printer has one display, 6 LEDs and 8
switches. Fi
ure below shows exterior view of the control panel.
Figure 1-8. Control Panel
LCD DISPLAY
Specification:20 characters in one row (5x7 dot matrix)
Function: Usually, LCD display displays printer condition.
In case of panel settin
is performed by
the indication.
LED LIGHTS
On Line LED(
reen):On = Printer is ready for printin
.
Off = Printer is not ready.
Data(yellow): On = Received data is not printed out and still left
in the printer. But if the received data except
effective printin
data is left, LED does not turn
on.
Off = No effective received data is left in the
printer. But if the control code is not ended, LED
is still On.
Blinkin
the data.
Error(red): Error happens and it can be canceled by
Continue switch.
“One-Touch” Settin
reen):
On = indicates that “One-Touch” settin
mode
1 is selected. 4 items can be set; Paper
Source, Selection, Paper size, Manual Feed,
and Orientation.
“One- Touch” Settin
reen)
On = indicates that “One-Touch” settin
mode
2 is selected. 4 items can be set; RITech, Copies,
MP Tray paper size and Toner Save Mode.
Select Type Mode LED(
reen)
On = indicates that the printer is in the select
type panel settin
mode.
SWITCHES
On-line: The printer
oes to not-ready state by pressin
this
button when the printer is in the on-line(ready) status.
Pressin
, the printer
escapes from the panel settin
oes to the On-line(ready) mode.
NOTE:If an error occurs after the printer goes to not-ready status,
the printer goes to not-ready status even the error is
canceled.
O n-Line Form Feed Continue
Paper Source Paper Size M anual Feed O rientation
RITech Copies M P Tray Size
Toner Save
M o d e
M e n u Ite m V a lu e E n te r
Select Type
Reset ALT
To Next Page
Loading...
