Epson EPL-N4000 - Changes from EPL-N4000 to EPL-N4000

EPSON EPL-N4000/EPL-N4000+ CHAPTER 1 Product Description
Rev.B 5
1.2 Changes from EPL-N4000 to EPL-N4000+
Here explains the chan
g
es from EPL-N400 to EPL-N4000+.
DIFFERENCE OF PANEL SETTING

“Printin
g
Menu”, “Device Menu” “ESC/PS Environment Menu” and
“ESC/Pa
g
e Environment Menu”

“Start ,menu”, “Initialization Menu” are erased

“Settin
g
Initialization = All settin
g
” in the “Initialization Menu” is
added as “Settin
g
Initialization” of “Common Menu”.

“One-touch” is added to “Printer Mode Menu”
DESIGNED FOR FINISHER AND STAPLE

The followin
g
are added to the panel settin
g
s.

Setup Menu/Stacker

Printin
g
Menu/Staple

Printin
g
Menu/Staple position

Support Menu/HDD Format

Support Menu/Adobe PS 3 kit HDD Init

The followin
g
are added to the printer messa
g
e.

Finisher Error yyy

Can’tAdjustFnshrTray

Finisher N Full

Install Staple Crt
g

Cover E Open

Cover F Open

Cover G Open

Cover H Open

Staple Cover Open

Finisher Not Connect

Stapler Supply

Can’t Staple (Warnin
g
)

Staple Ali
g
n (Warnin
g
)

Check Stapler (Warnin
g
)

Adobe PS 3 kit Hard Disk full

Maintenance Req 0001-0013

Followin
g
messa
g
e is erased from the printer messa
g
e

Optional device error
DESIGNED FOR ADOBE PS 3 KIT

The followin
g
is added to the printer messa
g
es.

Invalid Adobe PS 3 kit
MODIFIED ESC/PAGE

The followin
g
were added to the panel settin
g
items.

PGI was added to ESC/Pa
g
e Menu.

ESC/Pa
g
e was added to IES.

The followin
g
commands were added.

Job clear (GS pcO)