Epson EPL-N4000 - Maintenance; Exchange Units and Parts by User

EPSON EPL-N4000/EPL-N4000+ Chapter 6 Maintenance
Rev.B 227
6.1 Maintenance
This section explains about maintenance of the printer. Lubrication and
adhesion points are not really re
g
ulated for this printer. However, there
are some exchan
g
e units by the users are re
g
ulated.
6.1.1 Exchange Units and Parts by User
Any units or parts that user can chan
g
e are listed below. Refer to the
fi
g
ure on your ri
g
ht.
Table 6-1. Exchange Units and Parts
Figure 6-1. Exchange Units and Parts
Reference No. in the
figure
Name
Life (Page volume, one-
side printing)
1 EP Cartrid
g
e 20000
2 Fuser 300000
3 BTR (Transfer Roller) 300000
4 Feed Roll (Tra
y
1) 300000
5 Feed Roll (Tra
y
2) 300000
6 Feed Roll (Tra
y
3) 300000
7 Feed Roll (Tra
y
4) 300000
8 Feed Roll (Tra
y
5) 300000
CAUTION

If the fuser is exchanged, be sure to perform Fuser
Counter Clear. (See “Maintenance Mode” on page -46)

If BTR(transfer roller) is exchanged, be sure to
perform TR Counter Clear. (See “Maintenance Mode”
on page -46)

If Feed Roll is exchanged, be sure to perform LC1
∼
5
Counter Clear. (See “Maintenance Mode” on page -46)