EPSON EPL-N4000/EPL-N4000+ Chapter 4 Disassembly and Assembly
Rev.B 142
4.2.5 Control Panel
(See “Top Cover Assembly” on pa
e -253)
4.2.5.1 Removal
1. Remove the Top Cover. (See “Top Cover Assembly” on pa
e -139)
2. Disconnect the J417 from the Control Panel.
3. Push in on the four tabs securin
the Control Panel to the Top
Cover, while you press the Control Panel out of the Cover.
Figure 4-12. Removal of Control Panel
4.2.5.2 Installation
1. Position the Control Panel over the openin
in the Top Cover
Assembly, and press the Panel into the openin
. The panel snaps
into place.
2. Reconnect J417.
3. Reinstall the Top Cover. (See “Top Cover Assembly” on pa