EPSON EPL-N4000/EPL-N4000+ CHAPTER 1 Product Description
Rev.B 18
Wei
ht (No optional parts included)
41.1 K
(200V series)
Optional parts wei
h Capacity Feeder: Less than 35 K
(Bracket)
Duplex Print Unit: Less than 5.5 K
1.3.9 Other Specifications
Noise
Stand-by: Approx. 42(dB)
Operatin
: Approx. 69(dB)
Ozone Density: Less than 0.02 ppm
Toxicity: OPC, Tonner and plastic materials are all nontoxic.
1.3.10 Consumables
Components and life
Table 1-19. Cartridge
Note)* Toner life is estimated based on continuous printin
on A4 size
with 5% print covera
e. Toner life will vary accordin
method (continuous or intermittent, print
density, toner-save mode, etc.).
** This rotation corresponds to approximately 45000 sheets
printin
). This OPC
drum life is indicated by minute(s) calculated from the turn on
the en
ine status sheet.
How to distin
e
Type: Check OEM maker and if it is for Japan or for abroad.
1.3.11 Configuration
In the EPL-N4000 controller the followin
s are made with jumper resistors, and must thus be set at
the factory.
Settin
s: A4/Letter. LG, EXE/B4, B5 selection
Table 1-20. Destination-dependent settings (INPT5)
NOTE:For the B4 and B5 settings, LGL and EXE must not be
placed in the cassette.
For the LGL and EXE setting, B4 and B5 must not be placed
in the cassette.
Name Component Life Weight
ET Cartrid
Roller
• Black -Toner
• Cleaner Blade
Life: 20000 sheets*
OPC drum: 130 k turn.**
3.5K
R140 R141 Paper Size Detection
Mounted Not mounted B4, B5
Not mounted Mounted LGL, EXE
R129 Factor
e Size
Not mounted A4
Mounted LT
To Next Page
Loading...
