Epson EPL-N4000 - Type-B Interface

EPSON EPL-N4000/EPL-N4000+ CHAPTER 1 Product Description
Rev.B 22
1.3.12.3 Type-B Interface
This printer is fitted as standard with a Type B option interface slot.

Main system type:MTP600dpi, PW7016dt600dpi, PRG(****)rev,
AP1300ma, SPD0fast, D4**** is ROM version.
D4 is from EPL-N4000+. Desi
g
ned for Level3.

Printer Name: Factory default settin
g
is same as Product Name

Product Name: Product name

Emulation Type: See table below.

Entity Type: See table below.
Table 1-24. Emulation/Entity Type
NOTE:*1:Added when Kent is installed.
*3:RCC and DIAG cannot be selected by users. The
cassette paper size detection jumper setting is not affected.

Emulation Type:
When emulation is “Auto”,
Adobe PS 3 kit not started: AUTO (Emulation Type 1,2,3..)
Adobe PS 3 kit started: EJL (POSTSCRIPT-00, other Emulation
Type 1,2,3...)
When emulation is fixed,
: EJL (Default Emulation Type, other Emulation Type
1,2,3...)

Entity Type
When Emulation is “Auto”,
As shown in the table.
When Emulation is fixed,
Entity Type of default Emulation and EPSONPAGE4 are returned.
Emulation Emulation Type Entity Type
PS*
1
POSTSCRIPT-00*
1
LaserWriter*
1
ESC/Pa
g
e ESCPAGE-04 EPSONPAGE4
LJ4 PCL5E-00 EPSONPCL5
RCC*
3
-- --
DIAG*
3
-- --
1239X PRPXL24-01 EPSONPRPXL24
GL/2 HPGL2-01 EPSONNHPGL2
FX ESCP9 EPSONNFX
ESCP2 ESCPL2 EPSONLQ2