is the same as Product
Name
Product Name: Product Name
Emulation Type: See the table below
Entity Type: See the table below. When Emulation is “Auto”,
as it is shown in the table. When Emulation is
fixed, Entity Type of default Emulation and
EPSONPAGE4 are returned.
Table 1-23. Emulation/Entity Type
NOTE:*1 Added with Adobe PS 3 kit is installed.
*2 RCC and DIAG cannot be selected by users.
Pin Signal I/O
1Tx+O
2Tx- O
3Rx+I
4N.C. ---
5 N.C. ---
6 Rx- I
7 N.C. ---
8 N.C. ---
Emulation Emulation Type Entity Type
PS*
1
POSTSCRIPT-00*
1
LaserWriter*
1
ESC/Pa
To Next Page
Loading...
