Epson EPL-N4000 - MSI Nudger Roll; Removal; Installation

EPSON EPL-N4000/EPL-N4000+ Chapter 4 Disassembly and Assembly
Rev.B 173
4.2.28 MSI Nudger Roll
(See “Upper Feeder Assembly” on pa
g
e -267)
4.2.28.1 Removal
1. Remove MSI Feed Roll. (“MSI Feed Roll” on pa
g
e -172)
2. Remove the E-clip securin
g
the MSI Gate (“Upper Feeder
Assembly” on pa
g
e -267) to the Nud
g
er Shaft and remove the Gate.
3. Remove the E-clip securin
g
the Nud
g
er Roll to the Nud
g
er Shaft
and slide the Nud
g
er Roll off of the shaft.
Figure 4-42. Removal of MSI Nudger Roll
4.2.28.2 Installation
1. Slide the Nud
g
er Roll, forked end first, onto the Nud
g
er Shaft,
makin
g
sure the forked end en
g
a
g
es the pin at the end of the shaft.
2. Use an E-clip to secure the Nud
g
er Roll to the Shaft.
3. Slide the MSI Gate onto the Shaft (see the illustration for correct
positionin
g
of the Gate).
4. Use an E-clip to secure the Gate to the Shaft.
5. Reinstall the No-Paper Sensor Bracket onto the Feeder Assembly,
and use one screw to secure it to the Assembly.
6. Reinstall the MSI Feeder Assembly. (“MSI Feeder Assembly
(Manual Feeder)” on pa
g
e -164)