EPSON EPL-N4000/EPL-N4000+ Chapter 4 Disassembly and Assembly
Rev.B 155
4.2.14 Tray 1&2 Front Chute Assemblies
(See “Tray Interface -Tray 1” on pa
e -258 and “Tray Interface-Tray 2”
on pa
e -261)
4.2.14.1 Removal
1. Remove either Paper Tray 1 or Paper Tray 2.
2. Use a flat blade screwdriver to unhook the front of the Chute, and
remove the Chute.
Figure 4-23. Removal of Front Chute
4.2.14.2 Installation
1. Remove either Paper Tray 1 or Paper Tray 2.
2. Reinstall the Chute by slidin
in the rear of the Chute
into the tab on the printer frame, then hookin
the tab at the front of
the Chute into the openin
on the frame.
3. Reinstall the Paper Tray.
To Next Page
Loading...
