Epson N6 Series - Page 208

Maintenance 4. Cable
196 N6 Rev.2
(
6)
Turn OFF the Controller.
(7)
Disconnect the external short connector.
(8)
Disconnect the M/C cable.
For details, refer to Maintenance 4.6. M/C Cable.
(9)
Cut off the cable tie of the cables.
Be careful not to cut the cables.
(10)
Remove the user attachment of the Arm #4.
Hexagon socket head cap bolts: 2-M4×8
Cables are connected to the user attachment.
When you disconnect the cables, make sure
not to pull the user attachment forcibly.
User attachment

NOTE

NOTE