Setup & Operation 1. Safety
12 N6 Rev.2
1.7 Warning Labels
The Manipulator has the following warning labels.
The warning labels are attached around the locations where specific dangers exist.
Be sure to comply with descriptions and warnings on the labels to operate and maintain
the Manipulator safely.
Do not tear, damage, or remove the warning labels. Use meticulous care when handling
those parts or units to which the following warning labels are attached as well as the
nearby areas.
Location Warning Label NOTE
A
To avoid the Manipulator from falling, support
the Manipulator before removing the base
mounting screws.
Follow the instructions in this manual for
transportation and installation.
B
When releasing the brakes, be careful of the
arm falling due to its own weight.
C
You may get your hand or fingers caught when
bringing your hand close to moving parts.
To Next Page
Loading...
Need help?
General
