Setup & Operation 1. Safety
N6 Rev.2 13
Location Warning Label NOTE
D
Do not enter the work space when the
Manipulator is operating. It is extremely
hazardous since the Arm may collide and cause
serious safety problems.
E
Only authorized personnel should perform sling
work and operate a crane and a forklift.
If unauthorized personnel perform these
operations, it is extremely hazardous and may
result in serious bodily injury and/or severe
equipment damage to the robot system.
F
Do not touch the current-carrying parts inside
the Manipulator while the power is ON. It may
cause electrical shock.
G
HOT
You can get burned due to high temperature.
Location Label NOTE
H
Manipulator model, serial number, year and month
of manufactur
e, weight, and maximum payload
are printed.
To Next Page
Loading...
