Epson N6 Series User Manual

Setup & Operation 3. Environment and Installation
N6 Rev.2 45
Connector [unit : mm]
If you are passing cables through the holes on the base table, see the figures below.
92
49
11
44
54
35
82
Power Cable
Connector (Straight)
Signal Cable
Connector
M/C Cables
105
Power Cable
Connector (L-shaped)
85
35
80
For environmental conditions regarding space when placing the Controller on the base
table, refer to the Controller manual.
WARNING
■
To ensure safety, a safeguard must be installed for the robot system.
For details on the safeguard, refer to the
EPSON RC+ User’s Guide.

NOTE

Epson N6 Series Specifications

General

Brand	Epson
Model	N6 Series
Category	Robotics
Language	English