94 Eos Apex, Eos Ti, Gio, Gio @5, Ion Xe, Ion Xe 20, and Element 2 User Manual
To expand the Live / Blind tab to up to two additional monitors, press [Expand] &[Page
Right]. Once you are in an expanded mode, hitting [Expand] contracts the tab by one
monitor.
To remove all displays from the monitor, press [Expand] &[Page Left].
Scrolling within a Display
By default the page keys will advance / retreat a display by one page per press. However, to
activate scroll lock and scroll through displays, you may press [Shift] &[Stage]. SCROLLLOCK
will appear above the CIA when in scroll lock mode.
Scroll lock is a toggle state. When scroll lock is first pressed:
[Page Up] - scrolls table, spreadsheet and channel views up
[Page Down] - scrolls table, spreadsheet and channel views down
[Page Left] - scrolls table and spreadsheet views left
[Page Right] - scrolls table and spreadsheet views right
Selecting Displays
When a display is selected, the screen is highlighted in a gold border and the display name
(such as “1. Live Channel”) will be in gold as well. When a display is not selected, there is no
border and the tab name is gray.
If a display is already open, it can be selected in the following ways:
Press [Tab] to change focus between open tabs in numerical order.
Press [Tab] & [n], where “n” represents the tab number of the desired tab.
Press [Live] or [Blind] to automatically bring Live/ Blind into focus. If there are multiple
instances of Live/ Blind, pressing [Shift] & [Live] / [Blind] brings the next Live/ Blind tab
into focus.
Double press a record target button (such as [Preset] or [Submaster]) to either open the
associated display or select it if it is already open.
Zooming Displays
You may zoom in and out on displays. To do this, press and hold the [Format] button and
scroll the Level Wheel to alter the display. Scrolling the wheel up zooms in. Scrolling the wheel
down zooms out. Zooming the channel summary display when it is in 100 channel mode is not
supported. You can also zoom by holding down the left mouse button and rolling the scroll
wheel on a mouse.
Moving Displays
To move the active display from one monitor to another, press and hold the [Tab] key and use
the page arrow keys to move the display in the direction of the desired screen. One press of
the left or right page keys will move the display to the next screen in that direction. To move it
back, press the opposite arrow key.
Clickable Displays
Several displays have click supported cells. Clicking on a cell will select and place it on the
command line. You can click on multiple cells to select a range of items. Double-clicking a row
header will select that row and deselect any other rows. In-Cell editing must be enabled in
Setup>Device>Displays. See
In-Cell Editing (on page219)
To Next Page
Loading...
