System Basics 131
You can also make changes to a fader's configuration while in the fader list display by clicking
on a column. A virtual fader will be displayed. Click on the appropriate area of the fader to
access the configuration options. Selection can be done by clicking in the column or from the
command line.
Range editing is possible in this display by selecting all the needed faders. Changes made to
the configuration will be made to all of the selected faders.
With a fader selected, the CIAwill also display a virtual fader and the configuration options for
that fader.
Fader Ribbon
The fader ribbon shows the fader color coding that is used in the fader configuration tools.
Grandmasters and inhibitive submasters are in red, additive submasters are yellow ,playback
faders display in green ,and presets and palettes are orange.
Master Fader Configuration
Use {Master Fader} to open the master fader configuration window.
Target
This setting allows you to choose a cue list to map to the main playback fader.
To Next Page
Loading...
Need help?
General
