Patch 199
Color Calibration
The fixture editor also offers the option to disable generic fixture color calibration by
unchecking the "Use Calibration" box in the fixture editor.
This disables generic color calibration, and simplifies the color calculations being used for that
fixture profile. This can greatly improve fixture performance and speed for use in pixel maps.
Note:
Disabling a fixture's generic color calibration may affect its color matching,
fades, or other functionality.
Creating Multicell Fixtures
Multicell fixtures can be created by using the fixture editor. You can either create a new
fixture, or copy an existing fixture to edit.
To create a new fixture, press {New}. A new fixture will be added to the fixture list.
Naming a New Fixture
Once the new fixture appears in the list, it is recommended that you name the fixture you are
about to create.
To name a fixture in the creator list:
1. Use the [Page] keys, mouse, or touchscreen to select the new fixture.
2. Press [Label] or tap on the new fixture. You can press [Label] twice to clear the name.
The virtual keyboard will open in the CIA.
3. Enter the desired name for the new fixture on the virtual (or attached alphanumeric)
keyboard.
4. Press [Enter]. The name will appear in the “Type” column of the fixture list.
To Next Page
Loading...
