ETC Element 2 - Page 226

212 Eos Apex, Eos Ti, Gio, Gio @5, Ion Xe, Ion Xe 20, and Element 2 User Manual
Partitions
This display shows any recorded partitions, including the four pre-existing partitions, and
controls for enabling or disabling partitioned control. For more information, see Using
Partitions (on page539) .
Users
In this display, you can set the user ID for the console by selecting the User ID button and
entering a number from the keypad.
The table displays all current users IDs and their online status. Selecting a user number allows
you to select the user, or set them as the current user. Augment3d can be enabled or disabled
per user. Name fields can also be edited from this screen.
Users can be added, copied, and deleted with the softkeys on the right. For more information
on user ID see About User ID (on page544) .
Recall User Settings
When multiple users are in a system, this option allows you to select a user from which to
recall the following settings:
•
Manual Time
•
Sneak Time
•
Go to Cue Time
•
Back Time
•
Assert Time
•
Timing Disable Time
•
Off Time
•
Release Time
•
Record Confirm
•
Delete Confirm
•
Cue Only
•
Auto Playback
•
Plus %
•
Minus %
•
Level
•
Update Defaults (all)
•
Partition
•
Highlight
•
Lowlight
•
Highlight Remdim
•
Live Remdim Level
•
Preserve Blind
•
Encoder Degrees Per Rev
•
Encoder Percent Per Rev
•
Preserve Native (Patch Setting)
•
Gel Match Type (Color Picker Setting)
•
Gel Swatch Type (Color Picker Setting)
•
Pop-up Magic Sheet
•
Pop-up Nav Lock
Augment3d
The table displays the status of running Augment3d instances, and associated information.