ETC Element 2 User Manual

48 Eos Apex, Eos Ti, Gio, Gio @5, Ion Xe, Ion Xe 20, and Element 2 User Manual
Dimming Task Lights
Task lights can be dimmed from within Eos, under Setup > Device > Brightness Settings. The
{Desk Lamp} slider has a range of 0% (dimmest) to 100% (brightest). The default setting is
0%. The console will set the desk lamp to this setting on startup of the application. See
Brightness Settings (on page219) for more information.
Task lights can also be controlled by holding down [Displays] and rolling the level wheel.
WARNING: This device contains a lithium battery. Battery may explode if
mistreated. Do not recharge, disassemble or dispose of in fire.
Gio @5 Capacities
Output Parameters
•
4,096 (Min)
•
24,576 (Max)
Channel Counts
•
32,768 channels (can be any number from 1 to 99,999)
Cues and Cue List
•
999 cue lists
•
10,000 cues
Record Targets
•
10,000 Groups
•
10,000 x 4 Palettes (Intensity, Focus, Color and Beam)
•
10,000 Presets
•
10,000 Effects
•
99,999 Macros
•
10,000 Snapshots
•
10,000 Curves
•
10,000 Color Paths
Faders
•
1 dedicated motorized Master Playback pair, with Go and Stop/Back
•
5 motorized fader slots configurable as playbacks, submasters, grandmasters, timing
masters, effects masters, targets, or target lists
•
100 virtual pages of 10 faders each
•
200 configurable cue playbacks, with Go and Stop /Back
•
999 configurable submasters, with Bump and Assert/ channel select

ETC Element 2 Specifications

General

DMX Outputs	2
Touchscreen	Yes
Networking	Ethernet
Type	Lighting Control Console
Master Faders	2
Encoders	4
Ethernet Ports	2
USB Ports	4
Video Output	DisplayPort
Power Input	100-240VAC, 50/60Hz
Power Supply	Internal
Control Channels	6144
Output	Art-Net
Display	Multi-Touch LCD
Storage	Solid State Drive (SSD)