ETC Element 2 - Page 641

Show Control 627
OSCCue List Banks
Note: <index> is a 1-based index of any number of OSC cue list banks you wish to
create. Eos will send the cue list label and cue information for all OSC cue list banks.
See Explicit OSC Output for more information.
OSCMethod Arguments Examples/Comments
/eos/cuelist/<index>/config/<cue
list number>/<num prev
cues>/<num pending cues>
/eos/cuelist/1/config/2/3/6 (create OSC
cue list bank #1 for cue list 2, showing 3
previous cues, the current cue, and 6
pending cues)
NOTE: set <cue list number> to zero to
follow the current cue list
/eos/cuelist/<index>/config/<cue
list number>/<num prev
cues>/<num pending
cues>/<offset>
/eos/cuelist/1/config/2/3/6/10 (create OSC
cue list bank #1 for cue list 2, showing 3
previous cues, the current cue, and 6
pending cues, starting at offset 10 into
the cue list) offset is a zero-based index
into the entire cue list, where each cue
counts as one item and each cue part
counts as one item
NOTE: set <cue list number> to zero to
follow the current cue list
/eos/cuelist/<index>/page/<delta>
/eos/cuelist/1/page/1 (page OSC cue list
bank down 1 row)
/eos/cuelist/1/page/-1 (page OSC cue list
bank up 1 row)
/eos/cuelist/1/page/0 (jump back to the
current cue and follow it)
/eos/cuelist/<index>/select/<cue
number>
/eos/cuelist/1/select/100.4 (jump to cue
100.4)
OSC Softkey
Note: <index> is 1-based index into the softkey list. There are 6 softkeys and 2
pages, so valid <index> numbers are 1-12.
OSCMethod Arguments Examples/Comments
/eos/softkey/<index>
number for button edge: 1.0=down,
0.0=up (optional)
/eos/softkey/1=1.0 (press
1st softkey)
/eos/softkey/1=0.0 (release
1st softkey)
OSCXYZCoordinates
OSC Method Arguments Examples/Comments
/eos/xyz XYZ coordinates
Set XYZ position of selected
channel
/eos/chan/#/xyz XYZcoordinates
Set XYZposition of a specific