Europlex 3GS - Page 178

3GS Technical Manual
Issue 4.5 August 2005
Programming Menus 8-63
ES
Expansion Device
Tam p er
Node Tamper Node number
FA
Fire Alarm Fire condition detected Node number
FB
Fire By-pass Fire zone bypassed
(inhibited/disabled)
Zone Number
FR
Fire Restoral Fire condition on zone has been eliminated
(Transmitted when System is Unset/Dis-
armed)
Zone Number
FT
Fire Trouble Short or Discon on Fire zone Zone Number
FU
Fire Un-bypass Fire zone Inhibit/disable removed Zone Number
HA
Hold up Alarm Silent Alarm, User Duress Code entered at
keypad
Unused
JA
User Code Tamper User Code entered incorrectly 7 times Unused
JT
Time change System Time/Date Changed User Number
LB
Local Program Local programming begin – (Transmitted
when Engineer code entered on System)
Unused
LR
Phone line restoral Phone line restoral – used with LINE zone
type (Transmitted when zone closed)
Unused
LT
Phone line Trouble Phone line trouble – used with LINE zone
type (Transmitted when zone closed)
Unused
LX
Local Program Ses-
sion End
Local programming ended – Engineer off
Site (Another user code entered)
Unused
NL
Perimeter Armed System Half Armed Unused
OG1-OG30
Open Area Block areas 1-30 have been Unset/Dis-
armed
User Number
OP
Opening Report System has been unset/
disarmed
User Number
PA
Panic Alarm Manual Panic Alarm activated – Emergency
assistance requested
Zone Number
PB
Panic By-pass Panic zone has been Inhibited/Disabled Zone Number
PR
Panic Restoral Alarm/Trouble condition on Panic zone has
been eliminated (Can be transmitted when
System is Unset/Disarmed, or when zone
closes depending on “Panic Restores” vari-
able)
Zone Number
PT
Panic Tamper Short or discon on Panic zone Zone Number
PU
Panic Un-bypass Panic Zone inhibit/disable removed Zone Number