Ranger HRC™ operator´s manual – System description
12 Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
Junction Box connections, front side
Callout Description
5 Video cable
The Video cable is connected to the J7 connector on the Junction Box and to an
external video monitor.
NOTE: The J7 connector corresponds to the VIDEO 2 connector (J11) on
the JPC2 unit.
Figure 3.4 Junction box connections, rear side
Junction Box connections, rear side
Callout Description
1 System cable
The System cable is connected to the J5 connector on the Junction Box and to the
JCU connector (J1) on the JPC2 unit.
2 JCU cable
The JCU cable is connected to the J9 connector on the Junction Box and to the J10
connector on the Joystick Control Unit (JCU).
To Next Page
Loading...
