Ranger HRC™ operator´s manual – Technical appendices
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008 229
Changing the IP address
Step Action
1 Connect a standard PC to the Ranger HRC MS system, using one of the following
methods:
• Directly to the JPC2 unit, using a crossover FTP/STP cable.
• Via the LAN network, using a non-crossover FTP/STP cable.
2 Start your web browser of choice and enter the following address in the address eld:
http://192.168.250.100/main.php
3 Click on LAN settings in the left pane.
To Next Page
Loading...
