Ranger HRC™ operator´s manual – System software
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008 57
Image menu when IR is selected
Feature Description
Declutter The Declutter feature is used to temporarily remove the system information
from the monitor. When the ENTER button is pressed, the system informa-
tion is shown again.
Invert palette The Invert palette feature is used to invert the current IR palette:
• Gray (white hot) to Inv Gray (black hot) or vice versa.
• Rainbow to Inv Rainbow or vice versa.
• Rainbow HC to Inv Rainbow HC or vice versa.
• Iron to Inv Iron or vice versa.
NOTE: The IR palette can also be inverted in the Setup menu, see
section 7.6.1.1.
Change palette The Change palette feature is used to cycle trough the IR palette options:
• Gray
• Rainbow
• Rainbow HC
• Iron
NOTE: The IR palette can also be changed in the Setup menu, see
section 7.6.1.1.
Freeze/Live The Freeze/Live feature is used to change the monitor from live to frozen
image or vice versa. When the image is frozen, the text Frozen is displayed
on the monitor.
FOV The FOV feature is used to move the system to the next preset eld-of-view
(FOV).
NOTE: The available preset elds-of-view depend on the type of IR
camera. The preset elds-of-view are the same for the IR and TV
cameras.
Man. level/span The Man. level/span feature opens the Man. level/span dialog box, see
section 7.5.1.
Auto level/span The Auto level/span feature is used to enter the automatic adjustment mode
(Auto (linear) or Auto (full)), as set in the Setup – Image dialog box, see
section 7.5.1.
The
Auto level/span feature is only enabled when the system is in Man.
level/span mode.
To Next Page
Loading...
