or above. Make sure that the LED monitor and charging lamp are turned
OFF. Further, make sure, using a multimeter or a similar instrument, that the DC link bus voltage between the
terminals P(+) and N(-) has dropped to the safe level (+25 VDC or below).
Otherwise, an electric shock could occur.
• Always carry out the daily and periodic inspections described in the instruction/user's manual. Use of the
inverter for long periods of time without carrying out regular inspections could result in malfunction or
damage, and an accident or fire could occur.
• It is recommended that periodic inspections be carryout every one to two years, however, they should be
carried out more frequently depending on the usage conditions.
• It is recommended that parts for periodic replacement be replaced in accordance with the standard
replacement frequency indicated in the user's manual. Use of the product for long periods of time without
replacement could result in malfunction or damage, and an accident or fire could occur.
• Contact outputs [30A/B/C] use relays, and may remain ON, OFF, or undetermined when their lifetime is
reached. In the interests of safety, equip the inverter with an external protective function.
Otherwise, an accident or fire could occur.
• Maintenance, inspection, and parts replacement should be made only by qualified persons.
• Take off the watch, rings and other metallic objects before starting work.
• Use insulated tools.
Otherwise, an electric shock or injuries could occur.
• Never modify the inverter.
Doing so could cause an electric shock or injuries.
Disposal
To Next Page
Loading...
