9.3 FRENIC Loader Overview
9-54
[ 4 ] Test-running
The Test-running feature allows you to test-run the motor in the forward or reverse direction while monitoring the
running status of the selected inverter.
Operation status
Shows FWD, REV,
STOP and alarm
codes.
Select monitor item
Select what is to be displayed (e.g.,
output frequency or current) here using
the pull-down menu.
Frequency command
(updated)
Transmits the frequency
entered to the inverter
I/O terminal status
Shows the status of the
programmable digital I/O
terminals of the inverter.
Operation buttons*
Select monitor item
Select the operation status
information to be monitored in
real-time.
Update with latest inverter
information (updated)
Click the Refresh button to
refresh the contents of this
window to show the latest
inverter status.
Switch the frequency and running
commands (updated)
Select the frequency and run
command sources and click Apply.
*: The table below lists the details of the operation buttons.
Button Functionality
STOP Stop the motor.
FWD The motor runs in the normal rotation. (depressed state indicates running state.)
REV The motor runs in the reverse rotation. (depressed state indicates running state.)
RESET Reset all alarm information saved in the selected inverter.
To Next Page
Loading...
