Fuji Electric FRENIC-Ace series - External Frequency Command Potentiometer

11.16 External Frequency Command Potentiometer
11-61
SELECTING PERIPHERAL EQUIPMENT
Chap 11
11.16 External Frequency Command Potentiometer
An external frequency command potentiometer may be used to set the drive frequency. Connect the potentiometer
to control signal terminals [11] through [13] of the inverter as shown in Figure 11.16-1.
Type: RJ-13 (BA-2 B-characteristics, 1 k
Ω
)
Type: WAR3W-1k
Ω
(3W B-characteristics)
[13]
[12]
[11]
+10VDC
0V
External volume
3
2
1
Inverter
Figure 11.16-1 External Frequency Command Potentiometer Dimensions and Connection Example
Note: The dial plate and knob must be ordered separately.
Available from Fuji Electric Technica Co., Ltd.
Note: The dial plate and knob must be ordered separately.
Available from Fuji Electric Technica Co., Ltd.