11.29 FRENIC Visual Customizer
11-84
11.29 FRENIC Visual Customizer
11.29.1 Overview
FRENIC Visual Customizaer is a inverter support software which can provide the visual customizing environment
for FRENIC Ace.
Customers can modify their inverter easily with this software by themselves.
11.29.2 Specifications
No. of supported inverters
For USB connection: Only one inverter
For RS-485 connection: Up to 31 inverters
USB : USB cable (mini B connecter)
RS-485 : Shielded twisted pair cable for long
Operating environment
OS *
Microsoft Windows XP(SP3 or later)
2GB or more is recommended
Conversion to RS-485 communications required
to connect inverters
Monitor resolution 800 × 600 or higher
SXGA(1280 × 1024) / 32-bit color is
recommended
Transmission requirements
PC COM ports assigned to Loader
USB connection : Fixed at 12 Mbps
RS-485 connection :
38400,
, 9600, 4800 and 2400 bps
38400bps or more is recommended.
No. of retries ** None or 1 to 10
No. of retry times before detecting
communications error
Timeout setting **
100ms, 300ms, 500ms, 1.0s to 1.5s
to 1.9s, 2.0 to 9.0s, 10.0 to 60.0s
This setting should be longer than the response
interval time specified by the function code H39.
* Use on the PC downgraded to Windows XP from Windows7 or Windows Vista is not recommended.
** Bolded, underlined values are factory defaults.
*** Only support 32bit version of Windows XP, Windows Vista.
Support both 32bit and 64bit version of Windows 7.
11.29.3 Functions
This software can provide functions below.
Function Overview
Customizable function editing Draws functions and sends them to the inverter using a graphical editing tool.
Real-time trace
Displays the customizable function operation status with a waveform in real
time.
Communication settings Specifies settings for communicating with the inverter.
To Next Page
Loading...
