Fuji Electric FRENIC-Ace series - Terminal Layout Diagram (Main Circuit Terminal)

2.2 Wiring
2-15
INSTALLATION AND WIRING
Chap 2
[ 2 ] Terminal layout diagram (main circuit terminal)
The following terminals will have high voltage when power is ON.
Main circuit: L1/R, L2/S, L3/T, L1/L, L2/N, P1, P(+), N(-), DB, U, V, W, R0, T0, R1, T1
Insulation level
Main circuit - Casing : Basic insulation (overvoltage category III, degree of contamination 2)
Main circuit - Control circuit : Enhanced insulation (overvoltage category III, degree of contamination 2)
Risk of electric shock exists