11.27 Simple keypad with USB port (TP-E1U)
11-82
11.27 Simple keypad with USB port (TP-E1U)
Using the keypad in combination with FRENIC Loader enables a variety of data about the inverter unit
to be saved in the keypad memory, allowing you to check the information in any place.
TP-E1U cannot be directly mounted on FRENIC-Ace. It can be connected only through a cable.
Features
(1) The keypad can be directly connected to a computer through a commercial USB cable (mini B) without using
a converter.The computer can be connected online with the inverter.
(2) With the FRENIC Loader, the inverter can support thefollowing functions (1) to (4).
1) Editing, comparing, and copying the function code data
2) Real-time operation monitor
3) Trouble history (indicating the latest four troubles)
4) Maintenance information
Data can be transferred from the USB port of the keypad directly to the computer (FRENIC Loader) at the site of
production. Periodical collection of life information can be carried out efficiently
Dimensions
To Next Page
Loading...
