Fuji Electric FRENIC-Ace series - 2 ] When HP Rating Motor Is Selected by Motor Selection (Function Code P99;A39 = 1)

5.2 Function Codes Table
5-41
FUNCTION CODES
Chap 5
[ 2 ] When HP rating motor is selected by motor selection (Function code P99/A39 = 1)
■ 3-phase 200V class, HP rating motor
Motor rated
capacity setting
range (HP)
P02/A16
Applicable
motor
Capacity
(HP)
Rated
current
(A)
P03/A17
No-load
current
(A)
P06/A20
%R1 (%)
P07/A21
%X (%)
P08/A22
Rated slip
frequency
P12/A26
Iron loss
factor 1
P13/A27
Starting
mode (Auto
search delay
time 2)
H46
0.01 to 0.11 0.1 0.44 0.40 13.79 11.75 2.50 14.00
0.5
0.12 to 0.24 0.12 0.68 0.55 12.96 12.67 2.50 14.00
0.25 to 0.49 0.25 1.40 1.12 11.02 13.84 2.50 12.60
0.50 to 0.99 0.5 2.00 1.22 6.15 8.80 2.50 9.88
1.00 to 1.99 1 3.00 1.54 3.96 8.86 2.50 7.40
2.00 to 2.99 2 5.80 2.80 4.29 7.74 2.50 5.85
3.00 to 4.99 3 7.90 3.57 3.15 20.81 1.17 5.91 0.6
5.00 to 7.49 5 12.6 4.78 3.34 23.57 1.50 5.24 0.8
7.50 to 9.99 7.5 18.6 6.23 2.65 28.91 1.17 4.75 1.0
10.00 to 14.99 10 25.3 8.75 2.43 30.78 1.17 4.03 1.2
15.00 to 19.99 15 37.3 12.7 2.07 29.13 1.00 3.92 1.3
20.00 to 24.99 20 49.1 9.20 2.09 29.53 1.00 3.32
2.0 25.00 to 29.99 25 60.0 16.70 1.75 31.49 1.00 3.34
30.00 to 39.99 30 72.4 19.80 1.90 32.55 1.00 3.28
40.00 to 49.99 40 91.0 13.60 1.82 25.32 0.47 3.10 2.3
50.00 to 59.99 50 115.0 18.70 1.92 24.87 0.58 2.30
2.5
37.00 to 44.99 60 137.0 20.80 1.29 26.99 0.35 2.18
75.00 to 99.99 75 174.0 28.60 1.37 27.09 0.35 2.45 2.6
100.0 to 124.9 100 226.0 37.40 1.08 23.80 0.23 2.33 2.8
125.0 to 149.9 125 268.0 29.80 1.05 22.90 0.35 2.31 3.2
150.0 or above 150 337.0 90.40 0.96 21.61 0.39 1.73 3.5