Fuji Electric FRENIC-Ace series - Frequency Meters

11.18 Frequency Meters
11-63
SELECTING PERIPHERAL EQUIPMENT
Chap 11
11.18 Frequency Meters
Connect a frequency meter to the analog signal output terminals [FM], [FM2] (for China only) and [11] of the
inverter to measure the frequency component selected by function code F31 (FM), F35(FM2). Figure 11.8-1 shows
the dimensions of the frequency meter and a connection example.
Type : TRM-45 (DC10V, 1mA)
This model has two types of calibration: “0 to 60/120 Hz” and “60/120/240 Hz.”
Type : FMN-60 (10VDC, 1mA)
Type : FMN-80 (10VDC, 1mA)
Unit: inch (mm) Available from Fuji Electric Technica Co., Ltd.
Figure 11.18-1 Frequency Meter Dimensions and Connection Example
Available from Fuji Electric Technica Co., Ltd.
Frequency
meter
Inverter
(SW5:FMV)
(SW7:FMV)
(for China only)